The F.I.V.E. Program is an integrated maintenance
management system for the various fluid power systems on a drilling
rig. The program utilizes the latest in filtration for integrity and
RFID technology to positively identify components and associate them
with specific histories and maintenance inspections and procedures.
F.I.V.E. can help your company make
better decisions concerning the design, manufacturing, fabrication,
installation, and maintenance of your fluid power systems.
clean by assuring a fluidís
through continuous technical sensor
based on sound fluid
|Contamination of any of these fluid systems can cause production to stop on
a rig and must be managed for cleanliness and function.
- Lube Oil
Every system is essential to the operation of a rig and we can
remediate contamination events quickly with high capacity filters and
||Hydraulic Fluids - Hydraulic fluid is the
blood of any fluid power system. If the fluid becomes contaminated, the
damage caused to components cascades until operations are compromised.
F.I.V.E. integrates technical monitoring of the fluid and filtration to
assure the operating fluid creates full operating power over the life of
|Fuel Tanks - Contaminated fuel
can stop an entire process and create cascading damage to any internal
combustion engine. The biologicals and physical contaminates in a system
must be controlled. The F.I.V.E process continuously filters solids and
||Lube Oil - Contaminated lube oil can
destroy any device, motor or engine that requires lubrication. The
F.I.V.E process continuously filters solids and isolates water via a
very effective bypass filtration system.
|Cooling Systems - Hard water
and dirt will work together to create scale that will ream out system
seals and cause leakage and subsequent hot operations. The F.I.V.E
process continuously filters solids by a very effective bypass
||Pneumatic Systems - The F.I.V.E process
continuously filters solids and isolates water from the air flow and
tanks via a very effective bypass and water separation filtration
system. All pneumatic driven functions on a rig will improve immediately
and contribute to reliability.
|RFID - If the client should choose,
the F.I.V.E. Program can tag any pump, part, component, hose or tube
with a Radio Frequency Identification Tag (RFID) to positively identify a
system or component on an Internet database. Attached to this ID is a
customizable form where the client can set inspection cycles, repair
information, or location position. This makes part identification and
acquisition very easy. The core of this capability is created when a
client uses our Fluid Transfer
Management (FTM) Program to track the pedigree of each hose and
tube in a hydraulic system.
||Parts Support - The F.I.V.E. Program is
based on knowing what filters and parts are needed to maintain your system. Whether
identified on an RFID system or cataloged by database, getting the right
part is a lot easier and reduces downtime.
The F.I.V.E. Program created by FPI is designed to inventory and manage each of these fluid
systems and keep them clean and functional and to minimize downtime.